ambitrim® Digital PRO RGB RGBIC FULL LED Ambient Light Sets

The latest upgrade of our popular ambitrim Digital ambient lighting: The PRO variant.

- with 2-zone control and various welcome programs - All controllable in the app

We present to you our latest development in ambient lighting – our ambitrim® Digital RGB RGBIC LED. This new ambient lighting illuminates your interior with absolute silence, without any loss of luminosity, and countless modes to set the perfect ambiance! Whether on the dashboard, in the doors, or other locations, the possibilities are endless, allowing you to customize your vehicle to your liking. Light strips for the doors, dashboard, lighting units for footwells, side compartments, door handles, and even Eagle Eye RGBIC for ventilation ducts, all of this is possible with the ambitrim® Digital RGB RGBIC LED ambient lighting. No wish goes unfulfilled.

Features:

• Light strips can be shortened
• 2-zone control (Zone 1 = footwell, door handle, compartment lighting, ventilation duct lighting rgb - Zone 2 = light strips, ventilation duct lighting rgbic, speaker lighting)
• Selectable welcome program
• Blends discreetly into the interior
• Completely silent in operation
• Color change function via app control
• Digital LED = each LED individually controlled
• Countless color transitions possible
• Millions of static colors available
• Easily reversible at any time!
• Adds an individual touch to your vehicle
• Approved as interior lighting within the scope of road traffic regulations (StVO)
• 0807 LED Chips
• Individual wireless control units including parent and child units
  • thereby no cable connection between them
  • Child units can be connected at the point of use, e.g., to the constant power supply (not to the PWM regulated board lighting)
  • Child units respond only when the parent unit is turned on (meaning you definitely need one parent unit per car)

• Voltage: 10-14V DC
• Current consumption: up to 1,0A

Important: You still need corresponding extension cables/splitters for the ventilation ducts. Unfortunately, we cannot know in advance where you will place your parent module and how many ventilation ducts you have and how they are arranged.

• IMPORTANT: Only the light bars of the "normal" ambitrim Digital ambient lighting are compatible with the Pro variant (an adapter must be purchased). All other components cannot be combined with each other.
• Our instructions are to be understood as installation ideas. Our ambient lighting is intended to be connected to the car battery or the cigarette lighter socket (in the fuse box). Wiring to the onboard electronics is done at your own risk. Connection to the onboard lighting is NOT possible as most vehicles use a PWM signal to dim the lighting. This damages the color change modules.
• You only need to connect the parent unit to the switched power source (so that the ambient lighting comes on when, for example, the ignition is turned on). You connect the child units to the constant power lines. However, these will only come on when the parent unit gives the "command".
• If you want to drill holes in your door panel (necessary for a few models), drill them at an angle so you don't have to bend ambitrim®.
• All electrical work must be carried out by qualified personnel/workshop.
• Our ambitrim® light bars can be easily glued using plastic adhesive.
• You can find the installation video here: Click me
• For each module, you can connect a maximum of 2x 110cm light bars. If you connect more than that, you will overload the module and it will not work. Of course, it also depends on what else you connect to the module, but it should never be more than 2x 110cm light bars.
• A parent module has 2x connections for light sources, a child module has 4x connections for light sources.
• IMPORTANT: During the very first start of the system, the parent module must be powered before the child modules, as this ensures the learning process runs correctly. Also, please be careful with the cable transitions at the light bars. These are very delicate and can tear quickly if you are somewhat careless during installation.
• The footwell lighting can only be connected to the parent unit.
• IMPORTANT: The 147 cm light strips may only be connected to a 50 cm connection cable!
• Zone 1 = Footwell, door handle, and compartment lighting – can be connected directly to the modules.
  Zone 2 = Light strips, vent lighting, speaker rings, etc. – must be connected to the modules via the connection cable.

Legal Notices

This item is only permitted inside the vehicle. Outside the vehicle, the item is not allowed within the scope of road traffic regulations (short StVO) (see §22a StVZO).