indivitara® premium Design - self-adhesive microfiber premium with pattern - different colors

With this self-adhesive microfiber fabric, you can personalize your car's interior even more

Available by the metre: indivitara Design Premium microfiber fabric – for your car.

Now even more unique – our new design fabrics allow for a level of individuality usually only seen in custom upholstery!

Features:

• Creates a beautiful and personalized interior design
• Makes your car more modern/sporty/individual/high-end
• Easy to apply thanks to the stretchable film
• Can be removed at any time without damage
• Gives your vehicle a premium and elegant appearance
• Also ideal if you’re unhappy with the look of your current trim, whether your car is new or used
• Protects trim pieces and other interior parts from damage

Installation is possible on most vehicles without special tools. 

Technical specifications:

• UV resistant
• Lightfastness: 4–7 (Black 7, Graphite 6–7, Anthracite 5–6, all other colors 4)
• Colors: Black, Anthracite, Graphite, Jet Gray, Glut Red, Imola Yellow, Dirty White, Alaska Gray, Bahama Brown, Pacific Blue, Peaky Purple, Boho Beige, Groove Green
• Design: Diamond or Honeycomb
• Surface weight:
  • Black, Anthracite, Graphite: 200 GSM
  • All other colors: 260 GSM
• Fabric thickness including adhesive and backing paper:
  • Black, Anthracite, Graphite: 0.5 mm
  • All other colors: 0.7 mm
• Fabric thickness without adhesive layer:
  • Black, Anthracite, Graphite: 0.38 mm
  • All other colors: 0.46 mm
• Guaranteed free from harmful substances according to OEKO-TEX® 100
• Made from 70% recycled materials for environmental sustainability

Maximum delivery includes the following items:

If possible: by selecting the desired parts and quantities (top right next to the “Add to cart” button), delivery content and price will be adjusted accordingly.

Fits the following models:

Installation notes:

• The surface must be dry, clean, and free of grease to ensure proper adhesion. It must also be smooth and load-bearing. Porous or non-load-bearing surfaces, and overhead installations, require additional spray/contact adhesive. We recommend these two adhesives: Würth spray adhesive (e.g. for door panel inlays, center consoles) and Pattex Classic contact adhesive (for more demanding areas such as headliners, dashboards, trunk linings). Pattex generally adheres more strongly than Würth.
• Peel off the backing film evenly across the full width! If you need smaller pieces, roughly cut them first with the transfer film in place, then remove it. For larger sections, we recommend working in pairs. Be careful while peeling – once the film is removed, indivitara becomes very flexible and strongly sticks to itself.
• The material is easier to cut with the transfer film still attached. After that, only use a scalpel or sharp utility knife.
• The film should not be exposed to direct sunlight. If it is, we recommend using an impregnating agent, such as our Sudworx UV BLOCKER.
• Please do not use a heat gun. It will burn the fibers and won’t help stretch the material – unlike vinyl wrap films.
• When removing indivitara, adhesive residue may remain. These can be cleaned with alcohol-based cleaners.

• To minimize shipping costs, microfiber fabric longer than 1.0 m will be shipped folded. Don’t worry – once applied, no creases or fold marks will remain.

Legal notice

• *Compared to most self-adhesive microfiber fabrics from Asia, indivitara® offers significantly better UV resistance – backed by over 9 years of experience and in-house lab testing. We share test results transparently in the product description and data sheet and regularly conduct material tests to confirm and improve these values.