Our self-adhesive microfiber will help you to individualise your car interior
Self-adhesive microfiber by the meter for your vehicle.
Make your car interior now even more individual with our new design, just like you know it from a saddler.
Item specifics:
- Foam 2.0: NEW, with integrated mesh – No more disintegrating foam when removing the fabric!
- Creates a nice and individual design in your car’s interior
- Gives your car a modern, sporty and individual look
- Easy application due to elastic foil
- Retrofit possible to origin at any time
- Gives your car a premium and classy look
- Ideal, if you are unsatisfied with the looks of your decorative trims, whether it’s a new or used car
- Protects your trims and other parts from damage
- 2-3mm foam backing
Installation possible without special tools in most vehicles.
Technical data:
- light fastness: 3-7 (Black 7, Anthracite 3-4 and all others colors 4)
- color : Black, Anthracite, Graphite, Alaskagrey, Bahama Brown, Pacific Blue
- grammage:
- black: 200GSM
- other colors: 260 GSM
- material thickness including foam, glue and backpaper:
- black: 2,5-3,5mm
- other colors: 2,7-3,7mm
- material thickness exclusive transfer paper and glue:
- black: 0,38mm
- other colors: 0,46mm
Please keep in mind that to due storage on rolls, the foam thickness can be less than 2-3mm in the beginning. Anyway we use 2-3mm foam thickness during production.
Delivery:
The maximum delivery includes the following items
| Depending on size of selection |
1 piece |
If possible: By choosing the relevant equipment features (top right corner next to the "Add to cart" button), the delivery and price will be individually adjusted to your car.
Fits in:
Installation advice:
- The surface should be dry, clean, and free of grease to ensure maximum adhesion of the film. Additionally, the surface must be smooth and load-bearing. Non-load-bearing, porous, and open-pore surfaces as well as overhead installations will not hold without additional spray or brush adhesive. For this purpose, we generally work with these two adhesives: Würth Power Spray Glue (for example, for inlays of door panels, center consoles, etc.) and Pattex Power Adhesive Classic (for more demanding applications such as headliners, dashboards, trunk linings, etc.). The Pattex Power Adhesive Classic generally has stronger adhesion than the Würth Power Spray Glue.
- Only pull off the transfer film on the backside across the entire width and straight! If you need smaller pieces, cut these roughly with transfer paper first and then pull it off. For larger pieces, we generally recommend working with two people. Please be careful when removing the transfer film. Once it is off, the indivitara is very flexible and sticks very strongly to itself.
- The film is easier to cut when the transfer film is still on. Afterwards, only use a scalpel or similarly sharp knives.
- The indivitara should not be directly exposed to the sun, in which case we recommend an impregnation, such as our sudworx UV BLOCKER.
- Please do not use a hot air gun. This will only singe the fibers of the fabric and it also doesn't help to stretch something more strongly. This is quite different from vinyl films used in car wrapping.
- During the neutralisation (removal) of the indivitara, adhesive residues may remain. These can be removed with alcohol-based cleaners.
- Please try to correct as little as possible, as the foam may detach from the material during correction (IMPORTANT: This note does not apply to our Foam 2.0).
Shipping advice:
- To keep the delivery costs as low as possible, as of a length of 1,0 meters the microfaber will be delivered folded. If you find wrinkles in the fabric (not the backpaper) please let us know before applying the product.
Legal advice:
