Do you like indivitara®? But you're not sure if it's right for you?
Whether you can handle it? Do you want to try it out before you move on to bigger things?
No problem! We've heard you:
Here, you have the opportunity to order a leftover piece of at least 30x30cm of a specific indivitara® type.
Important: The piece doesn't have to be rectangular, it can be larger, but definitely not smaller. It's for testing purposes and we do not accept complaints regarding a specific condition. You choose a specific type of indivitara®, but not a specific color/seam variant/etc.
Features:
- Leftover piece for testing
- At least 30x30cm in size
- Gives you an impression of how you handle our indivitara®
Technical data:
- Dimensions: at least 30x30cm
Link to the datasheet:
https://individualiseyourcar.com/media/Datenblatt_indivitara.pdf
We regularly subject our fabrics to tests at material testing institutes.
The delivery includes the following parts:
| Depending on selection |
1 piece |
| |
|
If possible: By selecting the desired parts and their quantity (at the top right next to the "Add to cart" button), the delivery scope and price are individually adjusted.
Fits in the following models:
Installation instructions:
- The surface should be dry, clean, and free of grease to ensure maximum adhesion of the film. Additionally, the surface must be smooth and load-bearing. Non-load-bearing, porous, and open-pore surfaces as well as overhead installations will not hold without additional spray or brush adhesive. For this purpose, we generally work with these two adhesives: Würth Power Spray Glue (for example, for inlays of door panels, center consoles, etc.) and Pattex Power Adhesive Classic (for more demanding applications such as headliners, dashboards, trunk linings, etc.). The Pattex Power Adhesive Classic generally has stronger adhesion than the Würth Power Spray Glue.
- Pull the transfer film on the back only across the entire width and straight off! If you need smaller pieces, cut them roughly with transfer paper first and then pull it off. For larger pieces, we generally recommend working in pairs. Please be careful when removing the transfer film. Once it's off, the indivitara is very flexible and sticks very strongly to itself.
- The film cuts better when the transfer film is still on. Then only cut with a scalpel or similarly sharp knives.
- The film should not be exposed directly to the sun, in which case we recommend an impregnation, for example, our sudworx UV BLOCKER.
- Please do not use a hot air gun. This only scorches the fibers of the fabric and does not help to stretch something stronger. Quite different from vinyl films from the car wrapping area.
- When neutralizing (removing) the indivitara, adhesive residues may remain. These can be removed with alcohol-based cleaners.
Shipping notes:
Legal notes:
- indivitara® is a registered and protected trademark.
