Are you tired of the regular scrubbing and polishing of your car, knowing that dirt will just settle back in no time? Then our sudworx® 51 GRAPHENE GLOSS is exactly what you need!
Protect your car from dirt, insects, or other harmful environmental influences and minimize fine scratches and signs of wear. The sudworx® 51 GRAPHENE GLOSS ceramic coating provides robust and long-lasting protection for your paint. Thanks to the unique properties of graphene, excess water simply beads off, newly accumulated dirt can be easily removed without much effort, and your car shines in a whole new light. After applying the coating, it provides protection for up to 6 years.
No more scrubbing and polishing, it's time to protect and seal!
Features:
- Long-lasting protection for up to 6 years
- Protects against dirt, insects, and other harmful environmental influences
- Minimizes fine scratches and signs of wear
- Helps to remove newly accumulated dirt without effort
The delivery includes the following parts:
| sudworx® 51 GRAPHENE GLOSS - Ceramic Graphene Coating 30ml | 1 piece |
Hazard statements:
Signal word:
- Danger
- H225: Flammable liquid and vapor
- H314: Causes severe skin burns and eye damage
- H317: May cause an allergic skin reaction
- H300+H330: Fatal if swallowed or if inhaled
- H302+H332: Harmful if swallowed or if inhaled
- H412: Harmful to aquatic life with long-lasting effects
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P301: IF SWALLOWED: Rinse mouth.
- P303: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501: Dispose of contents/container through the selective waste collection system provided in your area.
1. Surface Preparation
- Thoroughly clean the surface to be treated, polish it, degrease with isopropanol, and let it dry.
- Correct the paint if needed and repeat the cleaning process.
2. Applying the Coating
- Grab our sudworx® applicator sponge. Optionally, you can wrap a small application cloth around the applicator sponge, but it works both ways.
- Distribute the sealant onto the sponge until it is sufficiently soaked (about 8-12 drops) and apply the sealant evenly using a crosshatch pattern on the surface to be treated.
(IMPORTANT: Work on areas of about 20x20 cm per pass! If you do not remove the sealant quickly enough, streaks may form).
After a maximum drying time of about 3 minutes, remove the remaining sealant with a dry microfiber cloth.
Covering the Entire Surface:
- Repeat this method to coat the entire body, windows, and mirrors.
- After finishing, your car must stay in a dry place for 1 day to allow the sealant to fully cure.
Important Notes:
- Do not apply to heated surfaces or in direct sunlight!
- Always wear protective gloves (nitrile or latex gloves) while working with the coating.
- An additional layer can be applied after 2 hours.
- The ceramicization and full bonding of the coating take 12 hours. During this time, avoid direct contact with water.
- The coating does not leave streaks when applied.
- It is not possible to remove an incorrectly applied coating.
Durability:
- To ensure maximum longevity of the sealant, you should repeat these steps 2-3 times.
- The durability of the coating is at least 6 years with the application of two layers.
IndividualiseYourCar UG
Gaußstr. 3
27367 Sottrum
Deutschland
info@individualiseyourcar.com