Our self-adhesive microfiber will help you to individualise your car interior
indivitara® Self-adhesive microfiber by the meter for your vehicle.
Make your car interior now even more individual with our new design, just like you know it from a saddler. Take individualization to the next level with real seams!
Item specifics:
- Real seams for the saddler feeling and maximal individualization
- Creates a nice and individual design in your car’s interior
- Gives your car a modern, sporty and individual look
- Easy application due to elastic foil
- Retrofit possible to origin at any time
- Gives your car a premium and classy look
- Ideal, if you are unsatisfied with the looks of your decorative trims, whether it’s a new or used car
- Protects your trims and other parts from damage
Installation possible without special tools in most vehicles.
Technical data:
- light fastness: 3-7 (Black 7, Anthracite 3-4 and all other colors 4)
- colors: Black, Anthracite, Graphite, Alaskagrey, Pacific Blue, Bahama Brown
- design: Diamond, Honeycomb and Stripe
- yarn color: many :)
- grammage:
- black: 200GSM
- other colors: 260 GSM
- material thickness including transfer paper and glue:
- black: 0,5mm
- other colors: 0,7mm
- material thickness exclusive transfer paper and glue:
- black: 0,38mm
- other colors: 0,46mm
Delivery:
The maximum delivery includes the following items
| Depending on size of selection |
1 piece |
Fits in:
Installation advice:
- The surface should be dry, clean, and free of grease to ensure maximum adhesion of the film. Additionally, the surface must be smooth and load-bearing. Non-load-bearing, porous, and open-pore surfaces as well as overhead installations will not hold without additional spray or brush adhesive. For this purpose, we generally work with these two adhesives: Würth Power Spray Glue (for example, for inlays of door panels, center consoles, etc.) and Pattex Power Adhesive Classic (for more demanding applications such as headliners, dashboards, trunk linings, etc.). The Pattex Power Adhesive Classic generally has stronger adhesion than the Würth Power Spray Glue.
- Only pull off the transfer film on the backside across the entire width and straight! If you need smaller pieces, cut these roughly with transfer paper first and then pull it off. For larger pieces, we generally recommend working with two people. Please be careful when removing the transfer film. Once it is off, the indivitara is very flexible and sticks very strongly to itself.
- The film is easier to cut when the transfer film is still on. Afterwards, only use a scalpel or similarly sharp knives.
- The indivitara should not be directly exposed to the sun, in which case we recommend an impregnation, such as our sudworx UV BLOCKER.
- Please do not use a hot air gun. This will only singe the fibers of the fabric and it also doesn't help to stretch something more strongly. This is quite different from vinyl films used in car wrapping.
- During the neutralisation (removal) of the indivitara, adhesive residues may remain. These can be removed with alcohol-based cleaners.
- Remember that our material is still stretchable, i.e. you have to be careful when peeling off the transfer film and when applying the material so that the sewn pattern does not deform. But with a little practice you can do it :)
Shipping advice:
- To keep the delivery costs as low as possible, as of a length of 1,0 meters the microfaber will be delivered folded. Don't worry, there are no folds or kinks remained, when you apply the microfaber.
Legal advice:
- Despite all due care, we unfortunately cannot guarantee that all seams will be perfect. We are absolute pioneers in this area and continuously improve the product. Especially with the stripe designs, small knots are unavoidable, as the seam would otherwise come undone. Please understand this and examine the fabric carefully before processing it, and if necessary, make use of your right of withdrawal.
