indivitara® Premium - Self-adhesive microfiber fabric Premium - By the meter - Various colors

With this self-adhesive and stretchable microfiber fabric, you can make your interior more personalized

Custom-made indivitara® Premium microfiber fabric for your car.

Features:

• Creates a beautiful and personalized design for the interior
• Makes your car more modern/sporty/individual/high-quality
• Easy application thanks to the stretchable film
• Can be "easily" reversed at any time
• Gives your vehicle a high-quality and elegant look
• Higher light fastness than the standard fabric
• Also ideal if you are dissatisfied with your existing trim look, whether for new or used cars
• Protects your trim and other parts from damage

Installation is possible on most vehicle models without special tools.

Technical data:

• UV resistant
• Light fastness: 4-7 (Black 7, Graphite 6-7, Anthracite 5-6, and all other colors 4)
• Colors: Black, Anthracite, Graphite, Jet Gray, Glut Red, Imola Yellow, Dirty White, Alaskan Gray, Bahama Brown, Pacific Blue, Peaky Purple, Boho Beige, Groove Green
• Fabric weight:
  • Black, Anthracite, Graphite: 200 GSM
  • Other colors: 260 GSM
• Fabric thickness including transfer paper and adhesive:
  • Black, Anthracite, Graphite: 0.5mm
  • Other colors: 0.7mm
• Fabric thickness without adhesive backing:
  • Black, Anthracite, Graphite: 0.38mm
  • Other colors: 0.46mm
• Guaranteed free from harmful substances according to OEKO-TEX® 100
• Made from 70% recycled materials for the sake of the environment

The delivery includes the following parts:

If possible: By selecting the desired parts and their quantity (top right next to the "Add to Cart" button), the delivery contents and price will be adjusted individually.

Fits the following models:

Installation instructions:

• The surface should be dry, clean, and grease-free to ensure maximum adhesion of the film. The surface must also be smooth and load-bearing. Non-load-bearing, porous, and open-pored surfaces as well as overhead applications will not hold without additional spray/brush adhesive. For this, we generally work with these two adhesives: Würth Kraft Spray Adhesive (for example, for inlays of door panels, center console, etc.) and Pattex Kraft Brush Adhesive Classic (for more demanding applications like headliners, dashboards, trunk linings, etc.). The Pattex Kraft Brush Adhesive Classic generally adheres more strongly than the Würth Kraft Spray Adhesive.
• Carefully peel the transfer film off the back over the entire width and straight! If you need smaller pieces, roughly cut them with transfer paper and peel it off only after that. For larger pieces, we recommend working in pairs.
• The film is easier to cut when the transfer film is still on. After that, only use a scalpel or similarly sharp knives.
• The film should not be exposed directly to the sun, in which case we recommend an impregnation, such as our Sudworx UV BLOCKER.
• Please do not use a hot air blower. This will only burn the fibers of the fabric and will not help stretch it further. Completely different from vinyl films used in car wrapping.
• When neutralizing (removing) the indivitara, adhesive residues may remain. These can be removed with alcohol-based cleaners.

• To keep shipping costs as low as possible, the microfiber fabric is shipped folded from a length of 1.0 meters. Don't worry, no wrinkles or creases will remain during application.

Legal information

-